KEM Co., Ltd. - F.A. parts - CODE SWITCH - KDP STANDARD TYPE

고객센터 전화: 051-322-5151, 팩스: 051-322-5155, 업무시간: 월~금 10:00~17:00 (토요,공휴일 휴무)

> Products > View all products

7 pin
8 pin

Please click on the photo above you can see the original size.

KDP-24B

Complete sealing structure :

Completely sealed and has excellent resistance to oil and water.
Minimum Wiring :

While multi-stage rotary switch combines the code in

a complicated wiring, our wiring is simplified and connect

the connector by using digital code system.

15˚ / REAL BINARY CODE / 7pin Standard type

* Please refer to user manual.

Quantity : 1

Title :

Product catalogue		dwg
Model	KDP-24B	15˚ / REAL BINARY CODE / 7pin Standard type

To improve the quality of the product, the design(including color and accessaries, etc.) may be changed without a prior notice and announcements.
Latest catalogue of our product.
PDF files you need to download the

(Acrobat Reader).

①	Step angle	12	30˚
①	Step angle	24	15˚
②	Code	A	Complement binary code
		B	Real binary code
		G	Real gray code
③	Pin number	None	7pin
③	Pin number	F	8pin
④	Terminal type	None	Standard type
④	Terminal type	C	Connector type

1. Complete sealing structure
   Completely sealed and has excellent resistance to oil and water.

2. Minimum wiring
   While multi-stage rotary switch combines the code in
   a complicated wiring, our wiring is simplified and connect
   the connector by using digital code system.

3. Simple change of setting value
   Setting value can be changed simply in SELF-TAPPING.

4. Adopt contact point made of gold
   Maintain stable friction resistance with double slide contact point
   and have high reliability.

5. Type of code
   3 Code type : complement binary, real binary, Real gray code,
   Available angles in 2 types: 15°, 30°

6. Prevent wrong signal
   Inhibit terminal or parity terminal are set depending on the code.

1. Operating Temperature : -20℃~+70℃
2. Rotational torque : 0.1~0.2N·m(1~2kgf·cm)
3. Friction resistance : DC 5V 1A resistance of below 100㏁
4. Insulation resistance :
   DC 250V / After 1min / Terminal to terminal / 500㏁≤
   DC 500V / After 1min / Terminal to ground / 25V 0.1A
5. Rating :
   Resistance load
   AC 5V 0.5A 48V 0.05A
   DC 5V 0.25A 25V 0.05A
6. Service life : 70,000 operations

* COMPLEMENT BINARY CODE

* REAL BINARY CODE

* REAL GRAY CODE

Model	step angle		Code			Pin number		Standard type	Connetor type
Model	30°	15°	Complement binary	Real binary	Real gray	7pin	8pin	Standard type	Connetor type
KDP-12A	●		●			●		●
KDP-12B	●			●		●		●
KDP-12G	●				●	●		●
KDP-24A		●	●			●		●
KDP-24B		●		●		●		●
KDP-24G		●			●	●		●
KDP-12AF	●		●				●	●
KDP-12BF	●			●			●	●
KDP-12GF	●				●		●	●
KDP-24AF		●	●				●	●
KDP-24BF		●		●			●	●
KDP-24GF		●			●		●	●
KDP-12A-C	●		●			●			●
KDP-12B-C	●			●		●			●
KDP-12G-C	●				●	●			●
KDP-24A-C		●	●			●			●
KDP-24B-C		●		●		●			●
KDP-24G-C		●			●	●			●
KDP-12AF-C	●		●				●		●
KDP-12BF-C	●			●			●		●
KDP-12GF-C	●				●		●		●
KDP-24AF-C		●	●				●		●
KDP-24BF-C		●		●			●		●
KDP-24GF-C		●			●		●		●

■ Specifications and standards are subject to change without prior notice.

When you adjust the stages, put the bolt stopper pin in the hole representing A, B, C and so on.

Example) 30°switching

8 stages set-up (0~8) START : 0 → A
END : 8 → S 11 stages set-up (0~11) START : 0 → A
END : 11 → A

Example) 15°switching

22 stages set-up (0~22) START : 0 → A
END : 22 → NONE 23 stages set-up (0~23)
(360°rotating) START : 0 → A
END : 23 → NONE

Warning

When it used in a machine that might cause accidents of worker or enormous property damage,
It should be used after the double safety device is attached.
If it is used with the voltage other than the designated one,
it might cause injury for human and property damage.
Before turning on the power, make sure whether the wires are connected correctly.
Do not disassemble, process, remedy or repair this product in any case,
because it might cause malfunctioning.

Attention

Do not use it outside.
Do not use it in a place, where corrosive gas(especially, harmful gas, ammonia, etc.)
and inflammable gases are generated.
When cleaning, do not use water or fluid solvent,
but use a dry cloth or compressed air.
For installation and separation of this product, make sure the power is OFF.
When connecting it with external equopments,
check the wire number and make sure it is connected correctly.
Avoid the following places when installing the product.

- Place where the main body can receive shock or vibration directly.
- Place with a lot of dusts, dirts, salts or irons.
- Place exposed with a direct sunlight.
The specifications (colors and parts of design, etc.) are subject to change
without prior notice for quality improvement of the product.